Conversion

Installing the spare wheel holder & changing the door hinges
AllConversionMB Sprinter

Installing the spare wheel holder & changing the door hinges

Before we could install our new spare wheel holder to the back door, we had to change the 270 degree door hinges of our Sprinter to 180 degree hinges. No sooner said than done! Regarding ...
Awning (Part 3) Accessory: LED lights
AllAwningConversionMB Sprinter

Awning (Part 3) Accessory: LED lights

Fiamma offers a great range of accessories for campervan awnings, such as wind baffles, bars and hooks. We equipped our awning with LED lights on the awning arms. The LED light strips ...
Awning (Part 2) Installing the brackets of the Fiamma F65 S for the supporting legs
AllAwningConversionMB Sprinter

Awning (Part 2) Installing the brackets of the Fiamma F65 S for the supporting legs

Because of the height of our 4WD Sprinter, the supporting legs of the awning Fiamma F65 S do not reach the ground! That’s why we installed the brackets to the wall of the vehicle. To ...
Awning (Part 1) Installation of the Fiamma F65 S
AllAwningConversionMB Sprinter

Awning (Part 1) Installation of the Fiamma F65 S

We want to make our small living space as big as possible, that’s why we expand it by some outside space, like a patio. Therefore we equip our Sprinter with an awning: the Fiamma F65 ...
LED Light Bar
AllConversionMB Sprinter

LED Light Bar

May there be more light: Front and back headlights, working headlights and now a LED Light Bar mounted to the roof of our Sprinter! Big cities like our hometown Hamburg, Germany have ...
Campervan water supply (Part 1) 80 liter underfloor greywater tank
AllConversionMB SprinterWater / plumbing

Campervan water supply (Part 1) 80 liter underfloor greywater tank

A “dirty” thing – waste water. To be self-sufficient with the campervan you need electricity as well as fresh and clean water. But where to but the dirty water? In the greywater tank! Our ...
Campervan bathroom (part 1) Shower tray made of stainless steel
AllConversionMB SprinterWater / plumbing

Campervan bathroom (part 1) Shower tray made of stainless steel

When we chose our vehicle, it was pretty clear that to be autarkic we need a small bathroom or a wetroom in our campervan. Part 1 – our shower tray made of stainless steel! One of the ...
Installing lashing tracks to our Camper
AllConversionMB Sprinter

Installing lashing tracks to our Camper

To expand storage and save room inside of the vehicle, we want to fasten equipment e.g. sand ladders and canisters on the outside. The required brackets are called lashing tracks which we ...
Installing new LED-working headlights after removing rust
AllConversionMB Sprinter

Installing new LED-working headlights after removing rust

We just wanted to maintain our working headlights because they were randomly screwed and glued to the roof. After removing the silicone we found a big, rusty hole! We had to find a solution ...
Our conversion plan of procedure – step by step
AllConversionMB Sprinter

Our conversion plan of procedure – step by step

We planned our layout and now we have to realize the build – but in what order? Here is our step-by-step plan. We have the vehicle and we have the windows - what’s next? Roughly speaking, ...