Outside installations

Installing a snorkel & second battery
AllConversionMB SprinterOutside installations

Installing a snorkel & second battery

A snorkel on a 4x4 offroad campervan does not only look good and increases the fording depth, it also prevents the intake of dust & dirt and therefore protects the engine from it. We ...
Installing the spare wheel holder & changing the door hinges
AllConversionMB SprinterOutside installations

Installing the spare wheel holder & changing the door hinges

Before we could install our new spare wheel holder to the back door, we had to change the 270 degree door hinges of our Sprinter to 180 degree hinges. No sooner said than done! Regarding ...
Awning (Part 3) Accessory: LED lights
AllAwningConversionMB SprinterOutside installations

Awning (Part 3) Accessory: LED lights

Fiamma offers a great range of accessories for campervan awnings, such as wind baffles, bars and hooks. We equipped our awning with LED lights on the awning arms. The LED light strips ...
Awning (Part 2) Installing the brackets of the Fiamma F65 S for the supporting legs
AllAwningConversionMB SprinterOutside installations

Awning (Part 2) Installing the brackets of the Fiamma F65 S for the supporting legs

Because of the height of our 4WD Sprinter, the supporting legs of the awning Fiamma F65 S do not reach the ground! That’s why we installed the brackets to the wall of the vehicle. To ...
Awning (Part 1) Installation of the Fiamma F65 S
AllAwningConversionMB SprinterOutside installations

Awning (Part 1) Installation of the Fiamma F65 S

We want to make our small living space as big as possible, that’s why we expand it by some outside space, like a patio. Therefore we equip our Sprinter with an awning: the Fiamma F65 ...
LED Light Bar
AllConversionMB SprinterOutside installations

LED Light Bar

May there be more light: Front and back headlights, working headlights and now a LED Light Bar mounted to the roof of our Sprinter! Big cities like our hometown Hamburg, Germany have ...
Installing lashing tracks to our Camper
AllConversionMB SprinterOutside installations

Installing lashing tracks to our Camper

To expand storage and save room inside of the vehicle, we want to fasten equipment e.g. sand ladders and canisters on the outside. The required brackets are called lashing tracks which we ...
Installing new LED-working headlights after removing rust
AllConversionMB SprinterOutside installations

Installing new LED-working headlights after removing rust

We just wanted to maintain our working headlights because they were randomly screwed and glued to the roof. After removing the silicone we found a big, rusty hole! We had to find a solution ...