MB Sprinter

Campervan Insulation (Part 4) Armaflex-AF in practice & alternatives
AllConversionInsulation / isolationMB Sprinter

Campervan Insulation (Part 4) Armaflex-AF in practice & alternatives

Thermal insulation for great room climate in the Sprinter Campervan no matter how hot or cold it is outside! We tell you about our practical experiences working with Armaflex and show you ...
Campervan Insulation (Part 3) Thermal insulation with Armaflex-AF
AllConversionInsulation / isolationMB Sprinter

Campervan Insulation (Part 3) Thermal insulation with Armaflex-AF

In the winter you want it nice and warm but in the summer refreshingly cool. For the best possible thermal insulation, low heat loss outwards and an always pleasant room climate, we insulate ...
Campervan Insulation (Part 2) Noise insulation with Alubutyl
AllConversionInsulation / isolationMB Sprinter

Campervan Insulation (Part 2) Noise insulation with Alubutyl

To minimize the general loud and rattling background noise of a cargo van, we will put up noise insulation in our Sprinter in the course of the van conversion. If you ever drove a cargo ...
Campervan insulation (Part 1) Basics
AllConversionInsulation / isolationMB Sprinter

Campervan insulation (Part 1) Basics

What you need to know about insulating a Campervan: useful and practical basics & facts Why should you insulate your Campervan? In cold areas (e.g. Alaska or Patagonia) the cold ...
Campervan flooring (Part 2) Sub-construction of wooden slats
AllConversionFlooringMB Sprinter

Campervan flooring (Part 2) Sub-construction of wooden slats

The sub-construction is important and fundamental to install the new floor plate as well as the future furniture and interior of the Sprintervan. Our basis are spruce slats glued to the ...
Campervan flooring (Part 1) Removing the old floor panel
AllConversionFlooringMB Sprinter

Campervan flooring (Part 1) Removing the old floor panel

It sure is a small surprise to find out what's beneath the original floor plate. Close your eyes and hope for the best? Rather not, because the floor is the base of the future interior build ...
How to readjust the back doors of the Sprinter 316 CDI in 7 steps
AllConversionMB Sprinter

How to readjust the back doors of the Sprinter 316 CDI in 7 steps

If the doors do not close correctly anymore, they have to be readjusted. We had to change the door hinges to install our spare wheel holder, so they are actually the reason we had to ...
Installing the spare wheel holder & changing the door hinges
AllConversionMB Sprinter

Installing the spare wheel holder & changing the door hinges

Before we could install our new spare wheel holder to the back door, we had to change the 270 degree door hinges of our Sprinter to 180 degree hinges. No sooner said than done! Regarding ...
Awning (Part 3) Accessory: LED lights
AllAwningConversionMB Sprinter

Awning (Part 3) Accessory: LED lights

Fiamma offers a great range of accessories for campervan awnings, such as wind baffles, bars and hooks. We equipped our awning with LED lights on the awning arms. The LED light strips ...
Awning (Part 2) Installing the brackets of the Fiamma F65 S for the supporting legs
AllAwningConversionMB Sprinter

Awning (Part 2) Installing the brackets of the Fiamma F65 S for the supporting legs

Because of the height of our 4WD Sprinter, the supporting legs of the awning Fiamma F65 S do not reach the ground! That’s why we installed the brackets to the wall of the vehicle. To ...